Enjoy Ham Radio
Transceiver interfaces (TI)
Transceiver Interfaces
RigExpert transceiver interfaces (TI) have many sustainable competitive advantages:
- two separate audio channels with separate controls
- CAT system support
- CW manipulation output
- RTTY & FSK modes are supported
Powerful USB transceiver interface based on high-quality stereo codec IC, for operating phone, CW and digital modes using a personal computer.
General features
CAT (Computer Aided Transceiver) system, CW keyer (WinKey), PTT and CW outputs, Transceiver audio interface for operating digital modes
Computer connection
No external power supply needed, Powered from the USB port (consuming 100 mA maximum), USB (Universal Serial Bus) connector
Transceiver connection
Single 25-pin connector for transceiver cable, Various transceiver models supported
Audio interface
Input/output samplerate: 8 to 48 kHz, Insulated from digital nets, Maximum input/output amplitude is 1V, True 16-bit DAC/ADC used, Volume levels are adjusted by the front panel potentiometers
CAT serial port
Baudrate: 300-115200 baud, Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
PTT/CW outputs
CW output: open collector, Maximum current is 50 mA, PTT output: open collector and TTL-level
System requirements
Desktop or laptop computer with USB 1/2/3 compliant port, MacOS/Linux/Windows 2000/XP/2003/Vista/7/8/10 (32- or 64-bit) operating system, No drivers required for systems on Windows 10/MacOS/Linux
Supported software
all other soundcard software!, MixW 2/3/4, MMTTY, MMSSTV, WSJT, WSJT-X, WSPR
Dimensions
145 x 110 x 40 mm
Weight
200 g
Operating temperature
0…40 °C (32…104 °F)
GTIN-13
4820185420273
Note
Specifications are subject to change without notice, Мade in Ukraine
Powerful USB transceiver interface based on high-quality stereo codec IC, for operating phone, CW, and digital modes using a personal computer.
All in one through a single USB port. Ideal interface for FT8 and WSJT modes!
General features
CAT (Computer Aided Transceiver) system, CW keyer (WinKey), Footswitch input, FSK output, Microphone input, PTT and CW outputs, Transceiver audio interface for operating digital modes, voice recording and playback
Computer connection
No external power supply needed, Powered from the USB port (consuming 100 mA maximum), USB (Universal Serial Bus) connector
Transceiver connection
Single 25-pin connector for transceiver cable, Various transceiver models supported
Audio interface
External microphone input with level control, Input/output samplerate: 8 to 48 kHz, Insulated from digital nets, Maximum input/output amplitude is 1V, Recording QSO audio stream, Volume levels are adjusted by the front panel potentiometers
CAT serial port
Baudrate: 300-115200 baud, Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
PTT/CW outputs
CW output: open collector, Maximum current is 50 mA, PTT output: open collector and TTL-level
FSK output
Baudrate: 45-1200 baud, Open collector output
System requirements
Desktop or laptop computer with USB 1/2/3 compliant port, For Windows 7 and previous versions of Windows only FTDI drivers are required, MacOS/Linux/Windows 2000/XP/2003/Vista/7/8/10 (32- or 64-bit) operating system, No drivers required for systems on Windows 10/MacOS/Linux
Supported software
all other soundcard software!, MixW 2/3/4, MMTTY, MMSSTV, WSJT, WSJT-X, WSPR
Dimensions
200 x 100 x 40 mm
Weight
300 g
Operating temperature
0…40 °C (32…104 °F)
GTIN-13
4820185420167
Note
Specifications are subject to change without notice, Мade in Ukraine
